〔59〕沃斯田铁扁圆状石墨铸铁
（Austenitic Cast Iron of Spheroidal Graphite)
标准代号	规格号码	记号	化学成分（%)Chemical composition								拉伸试验 Tensile requirements			硬度（HB)
			C	Si	Mn	P	S	Ni	Cr	Cu	厚度（mm)	抗拉强度(Mpa)	伸长度(%)
JIS	G5510	FCDANi-Mn13-7	≦3.0	2.0-3.0	6.0-7.0	-	-	12.0-14.0	≦0.2	≦0.5	≧210	≧390	≧15	130-170
DIN	1694	GGG-Ni-Mn13-7	≦3.0	2.0-3.0	6.0-7.0	-	-	12.0-14.0	-	-	≧210	≧390	≧15	≦170
JIS	G5510	FCDANi-Cr20-2	≦3.0	1.5-3.0	0.5-1.5	-	-	15.0-22.0	1.0-2.5	≦0.5	≧210	≧370	≧7	140-200
ASTM	A439	Type D-2	≦3.0	1.5-3.0	0.70-1.25	-	≦0.08	18.0-22.0	1.75-2.75	-	≧207	≧400	≧8	139-202
DIN	1694	GGG-Ni-Cr20-2	≦3.0	1.5-3.0	0.5-1.5	-	-	18.0-22.0	1.0-2.5	-	≧210	≧370	≧7	≦210
JIS	G5510	FCDANi-CrNb20-2	≦3.0	1.5-2.4	0.5-1.5	-	-	18.0-22.0	1.0-2.5	-	≧210	≧370	≧7	140-200
DIN	1694	GGG-Ni-CrNb20-2	≦3.0	1.5-2.4	0.5-1.5	-	≦0.04	18.0-22.0	1.0-2.5	-	≧210	≧370	≧7	≦200
JIS	G5510	FCDANi-Cr20-3	≦3.0	1.5-3.0	0.5-1.5	-	-	18.0-22.0	2.5-3.5	≦0.5	≧210	≧390	≧7	150-225
ASTM	A439	Type D-2B	≦3.0	1.5-3.0	0.70-1.25	-	≦0.08	18.0-22.0	2.5-3.5	-	≧207	≧400	≧7	147-211
DIN	1694	GGG-Ni-Cr20-3	≦3.0	1.5-3.0	0.5-1.5	-	-	18.0-22.0	2.5-3.5	-	≧210	≧390	≧7	≦255
JIS	G5510	FCDANi-SiCr20-5-2	≦3.0	4.5-5.5	0.5-1.5	-	-	18.0-22.0	1.0-2.5	≦0.5	≧210	≧370	≧10	180-230
DIN	1694	GGG-NiSi-Cr20-5-2	≦3.0	4.5-5.5	0.5-1.5	-	-	18.0-22.0	1.0-2.5	-	≧210	≧370	≧10	≦230
JIS	G5510	FCDANi22	≦3.0	1.0-3.0	1.5-2.5	-	21.0-24.0	≦0.5	-	≦0.5	≧170	≧370	≧20	130-170
ASTM	A439	Type D-2C	≦2.9	1.0-3.0	1.8-2.4	≦0.08	21.0-24.0	≦0.5	-	-	≧193	≧400	≧20	121-171
DIN	1694	GGG-Ni22	≦3.0	1.0-3.0	1.5-2.5	-	21.0-24.0	-	-	-	≧170	≧370	≧20	≦170
JIS	G5510	FCDANi-Mn23-4	≦2.6	1.5-2.5	4.0-4.5	-	-	22.0-24.0	≦0.2	≦0.5	≧210	≧440	≧25	150-180
ASTM	A439	Type D-2M	2.2-2.7	1.5-2.5	3.75-4.50	≦0.08	-	21.0-24.0	≦0.2	-	≧207	≧448	≧20	≦171
DIN	1694	GGG-Ni-Mn23-4	≦2.6	1.5-2.5	4.0-4.5	-	-	22.0-24.0	-	-	≧210	≧440	≧25	≦180
JIS	G5510	FCDANi-Cr30-1	≦2.6	1.5-3.0	0.5-1.5	-	-	28.0-32.0	1.0-1.5	≦0.5	≧210	≧370	≧13	130-190
ASTM	A439	Type D-3A	≦2.6	1.0-2.8	≦1.0	≦0.08	-	28.0-32.0	1.0-1.5	-	≧207	≧379	≧10	131-193
DIN	1694	GGG-Ni-Cr30-1	≦2.6	1.5-3.0	0.5-1.5	-	-	22.0-24.0	-	-	≧210	≧370	≧13	≦190
JIS	G5510	FCDANi-Cr30-3	≦2.6	1.5-3.0	0.5-1.0	-	-	28.0-32.0	2.5-3.5	≦0.5	≧210	≧370	≧7	140-200
ASTM	A439	Type D-3	≦2.6	1.0-2.8	≦1.0	≦0.08	-	28.0-32.0	2.5-3.5	-	≧207	≧379	≧6	139-202
DIN	1694	GGG-Ni-Cr30-3	≦2.6	1.5-3.0	0.5-1.5	-	-	28.0-32.0	2.5-3.5	-	≧210	≧370	≧7	≦100
JIS	G5510	FCDANi-Cr30-5-2	≦2.6	4.0-6.0	0.5-1.5	-	-	29.0-32.0	1.5-2.5	-	≧210	≧380	≧10	130-170
DIN	1694	GGG-NiSi-Cr30-5-2	≦2.6	4.0-6.0	0.5-1.5	-	-	29.0-32.0	1.5-2.5	-	≧210	≧380	≧10	≦170
JIS	G5510	FCDANi-SiCr30-5-5	≦2.6	5.0-6.0	0.5-1.5	-	-	28.0-32.0	4.5-5.5	≦0.5	≧240	≧390	-	170-250
ASTM	A439	Type D-4	≦2.6	5.0-6.0	0.5-1.5	≦0.08	-	28.0-32.0	4.5-5.5	-	-	≧414	-	202-273
DIN	1694	GGG-NiSi-Cr30-5-5	≦2.6	4.0-6.0	0.5-1.5	-	-	28.0-32.0	4.5-5.5	-	≧240	≧390	-	≦250
JIS	G5510	FCDANi35	≦2.4	1.5-3.5	0.5-1.5	-	-	34.0-36.0	≦0.2	≦0.5	≧210	≧370	≧20	130-180
ASTM	A439	Type D-5	≦2.4	1.0-2.8	≦1.0	-	-	34.0-36.0	≦0.1	-	≧207	≧379	≧20	131-185
DIN	1694	GGG-NiSi35	≦2.4	1.5-3.0	0.5-1.5	-	-	34.0-36.0	-	-	≧210	≧370	≧20	≦180
JIS	G5510	FCDANi-Cr35-3	≦2.4	1.5-3.0	0.5-1.5	-	-	34.0-36.0	2.0-3.0	≦0.5	≧210	≧370	≧7	140-190
ASTM	A439	Type D-5B	≦2.4	1.0-2.8	≦1.0	-	-	34.0-36.0	2.0-3.0	-	≧207	≧379	≧6	139-193
DIN	1694	GGG-Ni-Cr35-3	≦2.4	1.5-3.0	0.5-1.5	-	-	34.0-36.0	2.0-3.0	-	≧210	≧370	≧7	≦190
JIS	G5510	FCDANi-SiCr35-5-2	≦2.0	4.0-6.0	0.5-1.5	-	-	34.0-36.0	1.5-2.5	-	≧200	≧370	≧10	130-170
DIN	1694	GGG-NiSi-Cr35-5-2	≦2.0	4.0-6.0	0.5-1.5	-	-	34.0-36.0	1.5-2.5	-	≧200	≧370	≧10	≦170