| 〔85〕铜及铜合金棒 | ||||||||||||||||||||||||||
| (Copper and Copper Alloy Rods and Bars) | ||||||||||||||||||||||||||
| 标准代号 | 规格号码 | 记号 | 化学成分（%)Chemical composition | 拉伸试验Tensile requirements | ||||||||||||||||||||||
| Cu | Pb | Fe | Pb+Fe | Sn | Zn | Mn | Ni | Sb | B | Bi | P | Al | Cu+Al+Fe+Mn+Ni | As | O | Fe+Sn | Cu+Pb+Zn+Fe | 杂质混合 | 状态 | 直径（mm） | 降伏强度（Mpa) | 抗拉试验（Mpa) | 伸长率（%） | |||
| CNS | 10442 | C1020BEC1020BD | ≧99.96 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| GB | 5231 | TU1 | ≧99.97 | ≦0.003 | ≦0.004 | ≦0.004 | ≦0.002 | ≦0.003 | - | ≦0.002 | ≦0.002 | ≦0.001 | ≦0.001 | ≦0.002 | ≦0.002 | ≦0.002 | ≦0.002 | ≦0.002 | ≦0.002 | ≦0.002 | ≦0.08 | - | - | - | - | - |
| JIS | H3250 | C1020BEC1020BD | ≧99.96 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| ASTM | B133 | C10200 | ≧99.95 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| DIN | 1787 | OF-Cu | ≧99.95 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| CNS | 10442 | C1100BEC1100BD | ≧99.9 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| GB | 5231 | T2 | ≧99.9 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 挤制 | 30-120 | - | ≧186 | 40 |
| 拉制 | 5-80 | - | ≧196 | 45 | ||||||||||||||||||||||
| JIS | H3250 | C1100BEC1100BD | ≧99.9 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| ASTM | B133 | C11000 | ≧99.9 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| DIN | 1787 | ECu-57 | ≧99.9 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| CNS | 10442 | C1201BEC1201BD | ≧99.9 | - | - | - | - | - | - | - | - | - | - | 0.004-0.015 | 0.004-0.015 | - | - | - | - | - | - | - | - | - | - | - |
| JIS | H3250 | C1201BEC1201BD | ≧99.9 | - | - | - | - | - | - | - | - | - | - | 0.004-0.015 | 0.004-0.015 | - | - | - | - | - | - | - | - | - | - | - |
| ASTM | B183 B187 | C12000 | ≧99.9 | - | - | - | - | - | - | - | - | - | - | 0.004-0.012 | 0.004-0.012 | - | - | - | - | - | - | - | - | - | - | - |
| DIN | 1787 | SW-Cu | ≧99.9 | - | - | - | - | - | - | - | - | - | - | 0.005-0.014 | 0.005-0.014 | - | - | - | - | - | - | - | - | - | - | - |
| CNS | 10442 | C1220BEC1220BD | ≧99.9 | - | - | - | - | - | - | - | - | - | - | 0.015-0.040 | 0.015-0.040 | - | - | - | - | - | - | - | - | - | - | - |
| GB | 5231 | TP2 | ≧99.85 | ≦0.005 | ≦0.05 | ≦0.05 | ≦0.01 | - | - | ≦0.01 | ≦0.002 | ≦0.002 | ≦0.002 | 0.013-0.050 | 0.013-0.050 | ≦0.01 | ≦0.005 | ≦0.01 | ≦0.01 | ≦0.01 | ≦0.15 | - | - | - | - | - |
| JIS | H3250 | C1220BEC1220BD | ≧99.9 | - | - | - | - | - | - | - | - | - | - | 0.015-0.040 | 0.015-0.040 | - | - | - | - | - | - | - | - | - | - | - |
| ASTM | B133 | C12200 | ≧99.9 | - | - | - | - | - | - | - | - | - | - | 0.015-0.040 | 0.015-0.040 | - | - | - | - | - | - | - | - | - | - | - |
| DIN | 1787 | SF-Cu | ≧99.9 | - | - | - | - | - | - | - | - | - | - | 0.015-0.040 | 0.015-0.040 | - | - | - | - | - | - | - | - | - | - | - |
| CNS | 10442 | C3601BEC3601BD | 59.0-63.0 | 1.8-3.7 | ≦0.3 | ≦0.3 | - | 其余 | - | - | - | - | - | - | - | - | - | - | ≦0.5 | - | - | - | - | - | - | - |
| JIS | H3250 | C3601BEC3601BD | 59.0-63.0 | 1.8-3.7 | ≦0.3 | ≦0.3 | - | 其余 | - | - | - | - | - | - | - | - | - | - | ≦0.5 | - | - | - | - | - | - | - |
| DIN | 17660 17670 | CuZn-36Pb3 | 60.0-62.0 | 2.5-3.7 | ≦0.3 | ≦0.3 | ≦0.2 | 其余 | - | - | - | - | - | - | - | ≦0.5 | - | - | - | ≦0.5 | - | - | - | - | - | - |
| CNS | 10442 | C3602BEC3602BD | 59.0-63.0 | 1.8-3.7 | ≦0.5 | ≦0.5 | - | 其余 | - | - | - | - | - | - | - | - | - | - | ≦1.3 | - | - | - | - | - | - | - |
| JIS | H3250 | C3602BEC3602BD | 59.0-63.0 | 1.8-3.7 | ≦0.5 | ≦0.5 | - | 其余 | - | - | - | - | - | - | - | - | - | - | ≦1.3 | - | - | - | - | - | - | - |
| ASTM | B16 | C36000 | 60.0-63.0 | 2.5-3.7 | ≦0.35 | ≦0.35 | - | 其余 | - | - | - | - | - | - | - | ≦0.5 | - | - | - | ≦0.5 | - | - | - | - | - | - |
| DIN | 17660 | CuZn-36Pb2 | 60.0-62.0 | 2.5-3.5 | ≦0.3 | ≦0.3 | ≦0.2 | 其余 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| CNS | 10442 | C3603BEC3603BD | 57.0-61.0 | 1.8-3.7 | ≦0.35 | ≦0.35 | - | 其余 | - | - | - | - | - | - | - | - | - | - | ≦0.6 | - | - | - | - | - | - | - |
| JIS | H3250 | C3603BEC3603BD | 57.0-61.0 | 1.8-3.7 | ≦0.35 | ≦0.35 | - | 其余 | - | - | - | - | - | - | - | ≦0.5 | - | - | ≦0.6 | ≦0.5 | - | - | - | - | - | - |
| DIN | 17660 | CuZn-39Pb3 | 57.0-59.0 | 2.5-3.5 | ≦0.5 | ≦0.5 | ≦0.4 | 其余 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| CNS | 10442 | C3604BEC3604BD | 57.0-61.0 | 1.8-3.7 | ≦0.7 | ≦0.7 | - | 其余 | - | - | - | - | - | - | - | - | - | - | ≦1.5 | - | - | - | - | - | - | - |
| GB | 5232 | HPb 61-1 | 59.0-61.0 | 0.6-1.0 | ≦0.15 | ≦0.15 | - | 其余 | - | - | ≦0.005 | - | ≦0.002 | ≦0.01 | ≦0.2 | - | - | - | - | - | ≦0.75 | - | - | - | - | - |
| JIS | H3250 | C3604BEC3604BD | 57.0-61.0 | 1.8-3.7 | ≦0.7 | ≦0.7 | - | 其余 | - | - | - | - | - | - | - | - | - | - | ≦1.5 | - | - | - | - | - | - | - |
| ASTM | B16 | C36000 | 60.0-63.0 | 2.5-3.7 | ≦0.35 | ≦0.35 | - | 其余 | - | - | - | - | - | - | - | ≦0.5 | - | - | - | ≦0.5 | - | - | - | - | - | - |
| DIN | 17660 | CuZn-39Pb3 | 57.0-59.0 | 2.5-3.5 | ≦0.5 | ≦0.5 | ≦0.4 | 其余 | - | ≦0.5 | - | - | - | - | - | - | - | - | - | - | ≦0.6 | - | - | - | - | - |
| JIS | H3250 | C3605BEC3605BD | 56.0-60.0 | 3.5-4.5 | ≦0.5 | ≦0.5 | - | 其余 | - | - | - | - | - | - | - | - | - | - | ≦1.2 | - | - | - | - | - | - | - |
| CNS | 10442 | C3712BEC3712BD | 58.0-62.0 | 0.1-1.0 | - | - | - | 其余 | - | - | - | - | - | - | - | - | - | - | ≦1.2 | - | - | - | - | - | - | - |
| JIS | H3250 | C3712BEC3712BD | 58.0-62.0 | 0.1-1.0 | - | - | - | 其余 | - | - | - | - | - | - | - | - | - | - | ≦1.2 | - | - | - | - | - | - | - |
| DIN | 17660 | CuZn39-Pb0.5 | 59.5-61.5 | 0.3-1.0 | ≦0.3 | ≦0.3 | ≦0.2 | 其余 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| CNS | 10442 | C3771BEC3771BD | 57.0-61.0 | 0.5-2.5 | - | - | - | 其余 | - | - | - | - | - | - | - | - | - | - | ≦1.0 | - | - | - | - | - | - | - |
| GB | 5232 | HPb59-1 | 57.0-60.0 | 0.8-1.9 | ≦0.5 | - | - | 其余 | - | - | ≦0.01 | - | ≦0.003 | ≦0.02 | ≦0.2 | - | - | - | - | - | ≦1.0 | - | - | - | - | - |
| JIS | H3250 | C3771BEC3771BD | 57.0-61.0 | 1.0-2.5 | - | - | - | 其余 | - | - | - | - | - | - | - | - | - | - | ≦1.0 | - | - | - | - | - | - | - |
| ASTM | B124 | C37700 | 58.5-61.0 | 1.5-2.5 | ≦0.3 | - | - | 其余 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| DIN | 17660 | CuZn39-Pb2 | 58.5-60.0 | 1.5-2.5 | ≦0.4 | - | ≦0.2 | 其余 | - | ≦0.3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| CNS | 10442 | C4622BEC4622BD | 61.0-64.0 | - | - | ≦0.8 | 0.7-1.5 | 其余 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| GB | 5232 | HSn62-1 | 61.0-63.0 | ≦0.1 | ≦0.1 | - | 0.7-1.1 | 其余 | - | - | ≦0.005 | - | ≦0.002 | ≦0.02 | - | - | - | - | - | - | ≦0.3 | 挤制 | 10-120 | - | ≧363 | ≧22 |
| 拉制 | 5-40 | - | ≧392 | ≧17 | ||||||||||||||||||||||
| JIS | H3250 | C4622BEC4622BD | 61.0-64.0 | ≦0.3 | ≦0.2 | - | 0.7-1.5 | 其余 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| ASTM | B21 | C46200 | 62.0-65.0 | ≦0.2 | ≦0.1 | - | 0.5-1.0 | 其余 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| DIN | 17660 | CuZn-38Zn1 | 59.0-62.0 | ≦0.2 | ≦0.1 | - | 0.5-1.0 | 其余 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| CNS | 10442 | C4641BEC4641BD | 59.0-62.0 | - | - | ≦0.8 | 0.5-1.0 | 其余 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| JIS | H3150 | C4641BEC4641BD | 59.0-62.0 | ≦0.5 | ≦0.2 | - | 0.5-1.0 | 其余 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| ASTM | B21 | C46400 | 59.0-62.0 | ≦0.2 | ≦0.15 | - | 0.5-1.0 | 其余 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| DIN | 17660 | CuZn-38Sn1 | 59.0-62.0 | ≦0.2 | ≦0.1 | - | 0.5-1.0 | 其余 | - | ≦0.2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| CNS | 10442 | C6161BEC6161BD | 83.0-90.0 | - | 2.0-4.0 | - | - | - | 0.5-2.0 | 0.5-2.0 | - | - | - | - | 7.0-10.0 | ≧99.5 | - | - | - | - | - | - | - | - | - | - |
| JIS | H3250 | C6161BEC6161BD | 83.0-90.0 | - | 2.0-4.0 | - | - | - | 0.5-2.0 | 0.5-2.0 | - | - | - | - | 7.0-10.0 | ≧99.5 | - | - | - | - | - | - | - | - | - | - |
| DIN | 17665 | CuAl10-Fe3Mn2 | 其余 | ≦0.05 | 2.0-4.0 | - | - | ≦0.5 | 1.5-3.5 | ≦1.0 | - | - | - | - | 8.5-11.0 | - | - | - | - | - | - | - | - | - | - | - |
| CNS | 10442 | C6191BEC6191BD | 81.0-88.0 | - | 3.0-5.0 | - | - | - | 0.5-2.0 | 0.5-2.0 | - | - | - | - | 8.0-11.0 | ≧99.5 | - | - | - | - | - | - | - | - | - | - |
| JIS | H3250 | C6191BEC6191BD | 81.0-88.0 | - | 3.0-5.0 | - | - | - | 0.5-2.0 | 0.5-2.0 | - | - | - | - | 8.0-11.0 | ≧99.5 | - | - | - | - | - | - | - | - | - | - |
| ASTM | B150 | C61900 | - | ≦0.02 | 3.0-4.5 | - | - | ≦0.8 | - | 0.5-2.0 | - | - | - | - | 8.5-10.0 | ≧99.5 | - | - | - | - | - | - | - | - | - | - |
| DIN | 17665 | CuAl10-Fe3Mn2 | - | ≦0.05 | 2.0-4.0 | - | - | ≦0.5 | 1.5-3.5 | ≦1.0 | - | - | - | - | 8.5-11.0 | - | - | - | - | - | - | - | - | - | - | - |
| CNS | 10442 | C6241BEC6241BD | 80.0-87.0 | - | 3.0-5.0 | - | - | - | 0.5-2.0 | 0.5-2.0 | - | - | - | - | 9.0-12.0 | ≧99.5 | - | - | - | - | - | - | - | - | - | - |
| JIS | H3250 | C6241BEC6241BD | 80.0-87.0 | - | 3.0-5.0 | - | - | - | 0.5-2.0 | 0.5-2.0 | - | - | - | - | 9.0-12.0 | ≧99.5 | - | - | - | - | - | - | - | - | - | - |
| ASTM | B150 | C62400 | 82.0-88.0 | - | 2.0-4.5 | - | ≦0.2 | - | ≦0.3 | - | - | - | - | - | 10.0-11.5 | - | - | - | - | - | - | - | - | - | - | - |
| DIN | 17665 | CuAl10-Fe3Mn2 | 其余 | ≦0.05 | 2.0-4.0 | - | - | ≦0.5 | 1.5-3.5 | ≦1.0 | - | - | - | - | 8.5-11.0 | - | - | - | - | - | - | - | - | - | - | - |
| CNS | 10442 | C6782BEC6782BD | 56.0-60.5 | ≦0.5 | 0.1-1.0 | - | - | 其余 | 0.5-2.5 | - | - | - | - | - | 0.2-2.0 | - | - | - | - | - | - | - | - | - | - | - |
| GB | 5232 | HAl59-1-1 | 58.0-61.0 | ≦0.4 | 0.7-1.5 | - | - | 其余 | 0.1-0.6 | - | ≦0.005 | - | ≦0.002 | ≦0.01 | 0.7-1.5 | - | - | - | - | - | ≦0.7 | 挤制 | 10-120 | - | ≦441 | - |
| GB | 5232 | HFe59-1-1 | 57.0-60.0 | ≦0.2 | 0.6-1.2 | - | 0.3-0.7 | 其余 | 0.5-0.8 | - | ≦0.01 | - | ≦0.003 | ≦0.01 | 0.1-0.5 | - | - | - | - | - | ≦0.3 | 挤制 | 10-120 | ≦432 | 31 | |
| 拉制 | 5-12 | ≦490 | 17 | |||||||||||||||||||||||
| JIS | H3250 | C6782BEC6782BD | 56.0-60.5 | ≦0.5 | 0.1-1.0 | - | - | 其余 | 0.5-2.5 | - | - | - | - | - | 0.2-2.0 | - | - | - | - | - | - | - | - | - | - | - |
| DIN | 17660 | CuZn-40Al1 | 57.5-60.0 | ≦0.8 | ≦1.0 | - | ≦0.4 | 其余 | 0.8-1.8 | ≦1.0 | - | - | - | - | 0.4-1.3 | - | - | - | - | - | - | - | - | - | - | - |
| CNS | 10442 | C6783BEC6783BD | 55.0-59.0 | ≦0.5 | 0.2-1.5 | - | - | 其余 | 1.0-3.0 | - | - | - | - | - | 0.2-2.0 | - | - | - | - | - | - | - | - | - | - | - |
| JIS | H3250 | C6783BEC6783BD | 55.0-59.0 | ≦0.5 | 0.2-1.5 | - | - | 其余 | 1.0-3.0 | - | - | - | - | - | 0.2-2.0 | - | - | - | - | - | - | - | - | - | - | - |